14 / 27
51396c GB/2019-04
1
electronic GmbH & Co. KG • Heinrichstraße 3-4 • 12207 Berlin • Deutschland • info@bandelin.com
3.2
Special functions
3.2.1 Degas
– in the time scale area
• The DEGAS function is used to degas the unit before the treatment. The required
time can be set with the time setting button if desired. Then, keep the Start/Stop
button depressed for at least 2 seconds.
You can switch it off early by pressing the Start/Stop button again.
In addition to the countdown, the top green LED (
) also
fl
ashes during
degassing.
• Switching between ultrasound – degas: If the Start/Stop button is kept depressed
for a long time when ultrasound is running, the ultrasound is
fi
rstly switched off and
then reactivated with the Degas function after approx. 2 seconds.
3.2.2 Blocking/releasing continuous operation
– in the time scale area
• To avoid accidentally turning on the continuous operation, the continuous operation
can be blocked:
Pull out the mains plug.
Press and hold the preset time button and insert the mains plug at the same time.
The yellow LED "1 min" lights up in con
fi
rmation.
The function can be released again in the same way. The green continuous operation
LED ( ) lights up in con
fi
rmation.
