18 / 27
51396c GB/2019-04
1
electronic GmbH & Co. KG • Heinrichstraße 3-4 • 12207 Berlin • Deutschland • info@bandelin.com
Step 6:
Removing treated objects
After sonication, the parts are to be removed from the ultrasonic bath. Allowing them to
remain for a longer time in the bath
fl
uid may damage them.
Switch off the ultrasound.
Remove the basket and place it securely on a horizontal surface.
Caution
Depending upon the set temperature or the duration of sonication, the basket and
parts may be hot!
After the cleaning, rinse the treated parts with water of at least drinking quality.
Visually review the sonication results. A
fi
nal rinse is conducted using the type of
water appropriate for the goods, e.g. deionised, distilled or ultrapure water. The
fi
nal rinse can also be conducted in an available storage container using the type of
water appropriate for the goods.
Before the next sonication, verify the service life (see chapter 4.3.2) of the bath
fl
uid. Heed the speci
fi
cations of the preparation manufacturer. If necessary, empty
the oscillating tank.
Step 7:
Empty the oscillating tank.
Layers of contamination on the tank bottom reduce the ultrasonic output.
The oscillating tank is to be emptied after a long period of use or sonication of heavily
soiled parts, see chapter 4.3.2.
Switch off the ultrasonic bath (ON/OFF button).
Pull out the mains plug.
Empty the oscillating tank by placing the ball valve handle in the direction of the
discharge to open the outlet.
After emptying the oscillating tank, rinse it thoroughly.
For additional care instructions, see chapter 5.
