Protected against access of
instruments to dangerous components,
protected against solid foreign bodies
with a diameter of 2.5 mm or larger
Protected from
spraying water
up to 60° from its
vertical axis
8 / 27
51396c GB/2019-04
1
electronic GmbH & Co. KG • Heinrichstraße 3-4 • 12207 Berlin • Deutschland • info@bandelin.com
1.3
CE conformity
The ultrasonic bath satisfy the CE marking criteria for the European
- "Low-voltage
directive"
-
"Electromagnetic compatibility" directive
-
WEEE – Directive
in their valid versions.
A declaration of conformity can be requested from the manufacturer by providing the
serial number.
1.4
Technical data
The ultrasonic bath is interference-free and carries the CE - mark.
Safety: EN 61010-1,
EMC: EN 61326-1
Oscillating tank
- material
stainless steel, 1.4301
- usable depth
850 mm
-
fi
lling volume, min. / max.
9 l / 18 l (upper/lower
fi
lling level mark)
- interior dimensions (L × W × H)
150 × 150 × 895 mm
Housing
- material
stainless steel, 1.4301
- exterior dimensions (L × W × H) 330 × 330 × 1005 mm
- degree of protection
IP 33 pursuant
to EN 60529
- protection class:
Class I
- Ultrasonic frequency:
35 kHz
- Transducers:
4
- ultrasonic peak power*:
860 W
- Ultrasonic power:
215 W
eff
- leakage current:
< 3,5 mA
- nominal voltage:
230 V~ (± 10%) 50/60 Hz,
- mains cable length:
2 m
- heating power:
700 W (PR 140 DH)
- current consumption:
1.0 A / 4.0 A (PR 140 D / PR 140 DH)
- device fuse:
F 2 A / F 6,3 A (PR 140 D / PR 140 DH)
- weight (net):
Approx. 20 kg
* In order to improve the effect, the ultrasound is modulated, thanks to which a 4-fold HF power value is obtained as ultrasonic
peak power.