5/
Operation
24/52
1676-002 en/2022-05
• Preheating during the degassing of the sonication fluid is opti-
mal. See chapter
.
• To preheat, remove the basket or other accessories from the
oscillating tank. Cover the oscillating tank with the lid, if availa-
ble.
Information
The heater is equipped with overtemperature protection. If there is
no heating function, disconnect the ultrasound bath from the mains
and allow it to cool down to below 50 °C before putting it back into
operation.
RK 31 H
Switch on the heating using the toggle switch.
– The switch lights up when the heating is on, even if the target
temperature has been reached.
– The temperature control is permanently set at 65 °C.
RK 52 H
Turn on the heating by turning the knob to the desired tempera-
ture.
– The indicator light is lit.
– When the target temperature is reached, the indicator light goes
out.
RK 100 H, RK 102 H, RK 103 H, RK 156 BH, RK 170 H,
RK 255 H, RK 510 H, RK 512 H RK 514 H, RK 514 BH,
RK 1028 H, RK 1028 CH, RK 1050 CH
Turn on the heating by turning the knob to the desired tempera-
ture.
– The yellow and white indicator lights are lit.
– When the target temperature is reached, the yellow indicator
light goes out.
