4. 5. 2. 3
Oscillating systems with one PZT-ring
Replacement parts: 1 PZT-ring, diam. 38mm, SW 004
1 insulating disc* IS 013 white ring
2 Cu-Be disc with soldered squarehead screw, TS-0152-LM (Cu-Be = copper-
beryllium)
2 angles, RK 539
2 spring washers, DIN 127 B 4, NU 101
2 nuts, DIN 934 M 4, NM 303
2 insulating bushes, 11 × TS-0190, 1 × TS-0153 (to be used according to the
existing oscillating system)
1 hexagon socket head screw:
spring washer
DIN 127 B 4
steel bush
insulating disc
white ring
Cu-Be disc
TS-0152-LM
thread facing up
PZT-ring
marking
facing up
Cu-Be disc
TS-0152-LM
thread facing up
insulating bush
TS-0190
cone
hexagon socket head screw
squarehead screw
RK-538 M 4 × 8,
soldered in TS-0152
angle
RK-539
hexagonal nut
DIN 934 M 4 (brass)
transducer wire
red
transducer wire
blue
insulating bush
TS-0153
height in mm
steel bush
hexagon socket head screw
17
NS 342
DIN 912-M 10 × 45
22
NS 347
DIN 912-M 10 × 50
*
RK 100 SH from serial no. 192 178 xxx (onwards): an epoxy glass fibre disc is attached instead of the white ring IS 013.
If the oscillating system is damaged, the entire set of replacements parts must be used. If necessary re-adjust the generator.
18