BANDELIN SONOREX TECHNIK MB, Operating Manual

23626-002 GB/2021-10

17 / 24

1

 electronic GmbH & Co. KG  •  Heinrichstraße 3-4  •  12207 Berlin  •  Deutschland  •  info@bandelin.com

4.2  

General use  

Step 1 : 

Positioning



  Position the lifting device centrally above the SONOREX TECHNIK RM/TM bath. 

The support arms and basket must always be centred above the ultrasonic or 
rinsing bath. 

Step 2 : 

Loading



  Hang the basket, which may already be loaded with objects to be cleaned, 

over the support arms of the lifting carriage. 
Observe the maximum permissible loads for both the basket and lifting device.

Step 3 : 

Setting the oscillation time



  Set the desired oscillation time directly on the touchscreen or using the control 

buttons (see Operation). 



  Activate oscillation: Press and hold both buttons on the two-hand switch for 

3 seconds. The lifting device automatically lowers the basket into the tank and 
initiates the continuous raising and lowering of the basket in the liquid (oscillation). 
This strengthens the cleaning/rinsing e

ff

 ect.

Step 4 : 

Ending the oscillation



  After the set time has elapsed, or actuation of a button on the two-hand switch 

ends the oscillation movement, the lifting carriage moves the basket into the upper 
end position. 



  Remove the basket from the support arms and place it securely on a horizontal 

surface. 

Depending on the temperature set for the ultrasonic or rinsing bath, the basket 
and parts may be hot!