8
1.4
Technical data, general
The ultrasonic and rinsing baths are interference-free and marked with a
!
.
Compliance with limit values pursuant to EN 61010... .
Nominal voltage:
400 V 3N~ (± 10 %) 50/60 Hz, cable length 3 m
HF frequency:
40 kHz, or 25 kHz upon request
Tanks:
Stainless steel 1.4571 (V4A), 2 mm, welded, with weir on the
right-hand side and sprinkle tube for surface skimming on the
left-hand side of the tank
Serial number:
see type plate on rear of device
Degree of protection: IP 32 according to DIN
EN 60529
Environmental conditions pursuant to EN 61 010-1
Overvoltage category:
II
Degree of contamination:
1
Permissible ambient temperature:
5 to 40 °C
Permissible relative humidity up to 31 °C:
80 %
Permissible relative humidity up to 40 °C:
50 %
Condensation not allowed.
Only for indoor operation.
Protected against access
to hazardous parts with
tools; protected against solid
objects with a diameter
of 2.5 mm or larger
Protected from dripping
water up to 15° from its
vertical axis
