6536-000 en/2022-03
17/54
Preparation for operation
/4
4 Preparation for operation
4.1 Rinsing out the ultrasonic oscillating tank
Rinse the ultrasonic oscillating tank thoroughly with water before using it for the
first time.
4.2 Switching the ultrasonic bath on and off
Switching on the ultrasonic bath
Switch on the ultrasonic bath using the mains switch on the back of the TRISON
Base. After a few seconds, the startup screen appears on the touchscreen.
If there is no network connection during the start-up process, a message appears
briefly on the screen. After about 10 seconds, the ultrasonic bath restarts auto-
matically without a network connection.
If the startup screen does not appear after a long period of time, see
.
Switching off the ultrasonic bath
Switch off the ultrasonic bath using the mains switch on the back of the TRISON
Base.
After switching off the ultrasonic bath, wait at least 10 seconds before switching
it on again.
