LTC
10
Cleaning
• Clean the surface of the external module with a cloth slightly
moistened with soapy water or alcohol.
• Clean the controls carefully to avoid affecting the equipment
calibration.
• Avoid using any type of solvent to clean the product.
• After cleaning, remove any moisture residue with a dry cloth
to restore the surface to its original gloss.
WARNING!
Do not spray liquids directly on the equipment as this could damage speakers or
microphones. Use instead a slightly moistened cloth.
Maintenance
Periodically check that the mounting accessories are properly
attached to the installation surfaces and apply glue if necessary.
TECHNICAL SPECIFICATIONS
POWER OUTPUT
Internal Unit
3 W
External Speaker
3 W
DIMENSIONS
Internal Unit
105 L x 140 D x 80 H mm 4.1’’ x 5.5’’ x 3.1’’
External Speaker LTC-06
76 L x 33 D x 76 H mm
3.0’’ x 1.3’’ x 3.0’’
External Speaker LTC-06L
76 L x 103 D x 65 H mm 3.0’’ x 4.0’’ x 2.6’’
Internal Microphone length
590 mm
23.2’’
INPUT VOLTAGE
100 - 240 V AC
CURRENT CONSUMPTION
50 mA
B&G ELECTRONICS
3 YEAR LIMITED WARRANTY
B&G Electronics guarantees that this product leaves the factory free from defects related to materials and
manufacturing. If for any reason a failure related to materials and manufacturing were to occur during the period
of 3 years after the date of purchase, B&G Electronics would repair or replace the failing equipment free of charge.
This warranty shall be voided if the product is modified, tampered with, misused, or subjected to abnormal working
conditions. This warranty does not cover physical damage to the product surface. This warranty does not apply
when the malfunction results from the use of this product in conjunction with accessories, other products, or
peripheral equipment not designed by B&G Electronics.
Keep the purchase receipt for the entire duration of the warranty coverage.
