10
THE HEAD/LIFT PAGE HAS TO BE ENABLED IN THE SET UP MENU before
it can be displayed.
The port and starboard tacks are stored manually as
PORT
and
STBD
headings (see SETTING THE COURSE MEMORIES). When the helmsman
has to vary from these headings due to wind changes the legends
HEAD
or
LIFT
will appear on the display for the relevant tack. If wind data is available
over the Network a tack will automatically change between the
PORT
and
STBD
reference course. Otherwise it can be switched manually by two short
presses of the
LOCK
key or the remote button. The
HEAD/LIFT
values are
displayed in the analogue bar graph as degrees. If the Off Course alarm is
enabled the unit will sound an alarm and
HEAD
will flash if a head occurs,
pressing
ENTER
on the unit will cancel the alarm. The alarm will not sound for
a lift.
THE HEAD/LIFT DISPLAY
MODE
TIMER
LOCK
SETUP
LIGHTS
ENTER
Network COMPASS
LIFT
30
20
10
30
20
10
PORT
MODE
TIMER
LOCK
SETUP
LIGHTS
ENTER
Network COMPASS
LIFT
30
20
10
30
20
10
STBD
MODE
TIMER
LOCK
SETUP
LIGHTS
ENTER
Network COMPASS
HEAD
30
20
10
30
20
10
STBD
MODE
TIMER
LOCK
SETUP
LIGHTS
ENTER
Network COMPASS
HEAD
30
20
10
30
20
10
PORT
