•
Globally change all displays over to a different source from any
display. (This only includes products set to Group mode.)
Ú
Note:
In order to enable group selection, the display must be
set to Simrad group.
Devices with the Group set to None can be set to use different
sources to those of the rest of the network devices.
Advanced source selection
This allows the most flexible and precise manual control over which
devices provide data. Some data sources, such as those for fuel
level, or engine RPM, can only be changed from the Advanced
menu. Occasionally Auto Select may not assign the desired source,
which may be corrected using the Advanced Source Selection. An
example of this is where twin installations with NMEA 2000
compliant engines are not programmed with unique instance
numbers. This means that the auto select feature cannot determine
which engine is fitted on the port and which is fitted on the
starboard side.
Ú
Note:
The
Advanced
option is visible in multiple places - the
bottom of the
Sources
list, and under each source category (for
example, Compass). The latter shows a filtered list that only
relates to devices that output data relevant to the category.
Device list
The Device list shows the devices that provide data. This may
include a module inside the unit, or any external NMEA 2000 device.
36
Software Setup
| Vulcan R Series Installation Manual
Summary of Contents for Vulcan R
