Seastate filter
The Seastate filter is used to reduce rudder activity and autopilot
sensitivity in rough weather.
OFF
Seastate filter is disabled. This is default.
AUTO
Reduces rudder activity and autopilot sensitivity in rough weather
by an adaptive process. The AUTO setting is recommended if you
want to use the seastate filter.
MANUAL
Linked to the steering response control settings described
previously. It may be used to manually find the optimum
combination of course keeping and low rudder activity in rough but
steady sea conditions.
Setting sailing parameters
Ú
Note:
Sailing parameter settings are only available if the
boat type is set to Sail in the Autopilot Commissioning
dialog.
Tack time
When performing a tack in WIND mode, the rate of turn (tack time)
can be adjusted. This gives single-handed sailors time to handle the
boat and the sails during a tack. A turn performed without shifting
wind side, is also made at a controlled turn rate.
Range: 2-50
40
Software Setup
| Vulcan Series Installation Manual
Summary of Contents for Vulcan Series
Page 1: ...ENGLISH VulcanSeries Installation Manual bandg com...
Page 2: ......
Page 8: ...8 Preface Vulcan Series Installation Manual...
Page 64: ...988 11099 001 0980...