Autopilot
You can activate the autopilot from any panel.
1.
Press the
STBY/AUTO
key or the Autopilot tile in the Instrument bar
2.
Select the autopilot mode in the Autopilot pop-up
S
Standby
Autopilot is passive. Used when manually steering at the
helm
FU
Follow-up
Manual steering. The rudder angle is set by the
Rotary
knob
or by another FU unit
NFU
Non-Follow-up
Manual steering. The rudder movement is controlled by
the
Port
and
Starboard
buttons in the Pilot pop-up, or by
another NFU unit
A
Auto
Automatic steering, maintaining the set heading
N
D
NoDrift
Automatic steering, keeping the vessel on a straight bearing
line by compensating for drift
N
Navigation
Automatic steering, navigating the vessel to a specific
waypoint or through a route using GPS data
W
Wind *
Automatic steering, maintaining the set wind angle
W
N
Wind
navigation *
Automatic steering, navigating the vessel to a specific
waypoint or through a route using both wind and GPS data
* Only available if the boat type is set to Sailboat.
¼
Note:
You switch the autopilot to Standby mode from any automatic mode by a
short press on the
STBY/AUTO
key.
Adjust set heading / course / wind angle
Adjust set heading (Auto mode), set wind angle (Wind mode) and
set course (NoDrift mode) by:
•
tapping the
Port
or
Starboard
buttons in the autopilot pop-up,
or by
•
turning the
Rotary
knob.
