Ú
Note:
If using H5000 with a rotating mast, use mast rotation for wind needs to be
disabled as the H5000 CPU will automatically correct the wind information relative to the
vessel.
SOG as boat speed and COG as heading
Use SOG as boat speed
If boat speed is not available from a paddle wheel sensor, it is possible to use speed over
ground from a GPS. SOG will be displayed as boat speed and used in the true wind
calculations and the speed log.
Use COG as heading
If heading data is not available from a compass sensor, it is possible to use COG from a GPS.
COG will be used in the true wind calculations.
Ú
Note:
The autopilot cannot be operated using COG as the heading source. COG cannot
be calculated when stationary.
GPS offset - start line configuration
In order for the start line feature to work at it’s optimum, the exact position of the vessels
bow must be known. This is achieved by entering position offsets for the GPS sensor. These
offsets combined with heading data will allow the software to accurately determine the
bows distance from the start line.
GPS Bow Offset
Enter the distance from bow to GPS (always a positive value)
Ú
Note:
Ensure the bow offset includes any projections forward of the hull, such as a
bowsprit.
GPS Centerline offset
Enter the distance from vessel centerline to GPS (negative to port)
Activating/deactivating features and applications
Use the system settings features option to activate/deactivate features and applications.
System setup
| Zeus³S Installation Manual
27
Summary of Contents for Zeus3S
Page 1: ...ENGLISH Zeus3 S Installation Manual www bandg com...
Page 2: ......
Page 50: ......
Page 51: ...988 12599 001...
