You have the following options:
•
Ignore the alarm
- The alarm is muted and the message closed. The alarm does not reappear
Ú
Note:
If you ignore the alarm, the AIS SART icon remains visible on your chart, and the
AIS SART remains in the vessels list.
•
Save the waypoint
- The waypoint is saved to your waypoint list. This waypoint name is prefixed with MOB
AIS SART - followed by the unique MMSI number of the SART. For example, MOB AIS
SART - 12345678.
•
Activate the MOB function
- The display switches to a zoomed chart panel, centered on the AIS SART position
- The system creates an active route to the AIS SART position
Ú
Note:
If the MOB function is already active, this will be terminated and replaced by the
new route towards the AIS SART position.
Ú
Note:
If the AIS stops receiving the AIS SART message, the AIS SART remains in the
vessels list for 10 minutes after it receives the last signal.
Vessel alarms
You can define several alarms to alert you if a target shows up within predefined range limits,
or if a previously identified target is lost.
AIS target symbols
Safe AIS target with course extension line turned off. Bold lines indicates
dangerous AIS target.
Moving and safe AIS target with course extension line.
Dangerous AIS target, illustrated with bold line.
A target is defined as dangerous based on the CPA and TCPA settings. Refer
to “Defining dangerous vessels”.
Lost AIS target.
When no signals have been received within a time limit, a target is defined
as lost.
The target symbol represents the last valid position of the target before the
reception of data was lost.
88
AIS
| Zeus³S Operation Manual
Summary of Contents for Zeus3S
Page 1: ...ENGLISH Zeus3 S Operator Manual www bandg com...
Page 2: ......
Page 139: ......
Page 140: ...988 12586 001...
