Bandini Industrie GiBiDi DCD 100, Instructions For Installation Manual

28

29

UK

UK

DCD

DCD

10 #

LOGIN ADMINISTRATOR AS USER WITH ALL KEYS ENABLED

11 #

ENTER LEARNING MODALITY

12 #

ENABLE FAST LEARNING MODALITY

13 #

DISABLE FAST LEARNING MODALITY

14 #

ENABLE LONG TRANSMISSION FOR THE STORAGE OF THE DEVICE ON A RECEIVER

15 #

COMPLETE RESET OF THE DEVICE

If one of the listed options is chosen, the system signals 

OK

, otherwise it signals 

ErrProc

.

1 #

Configuration enabled default keys for the users

3 #

Keys disabling with memory maintaining of the assigned key code

4 #

Enter a new user

2 #

Keys enabling with recovery of the assigned key code

Permits to set the keys enabled for all recorded users. The code transmitted will be the same of the key pressed.
For instance:

• press key 1  = transmission code channel 1
• press key 2  = transmission code channel 2
• ……
• press key 9  = transmission code channel 9

By default, all keys are enabled.

1. Enter the administrator code and confirm with 

#

.

2. Press key 

1

 on the keyboard and confirm with 

#

.

3. If the operation is successful, the system signals 

OK

, otherwise 

ErrProc

.

4. Press the keys (1, 2,…, 9) corresponding to the channels that must be enabled by default for all users.

5. Confirm with 

#

.

6. The  system  records  the  configuration  set,  answers  with  a  signal 

SuccProc

  and  goes  back  to  the 

Administrator menu.

Now  you  can  go  on  with  the  other  options  or  execute  the  Esc  procedure  or  let  the  system  execute  it 
automatically.

Permits to disable the keys, maintaining the memory of the channel code assigned to the keys. 

1. Enter the administrator code and confirm with 

#

.

2. Press key 

3

 on the keyboard and confirm with 

#

.

3. If the operation is successful, the system signals 

OK

, otherwise 

ErrProc

.

4. Press the keys (1, 2,…, 9) corresponding to the channels that must be disabled. If you press the key 

0

 or 

the key  , the system will answer with the signal 

Err

.

*

5. Confirm with 

#

.

6. The  system  records  the  configuration  set,  answers  with  a  signal 

SuccProc

  and  goes  back  to  the 

Administrator menu.

Now  you  can  go  on  with  the  other  options  or  execute  the  Esc  procedure  or  let  the  system  execute  it 
automatically.

Permits to enter a new user in the system. 

1. Enter the Administrator code and confirm with 

#

.

2.

.

3.

.

4. To enter a new user, it is necessary to identify the first free position in memory by means of the following 

procedure:

a. If you know the first free position in memory go to step 5;

b. If  you  do  not  know  the  free  position,  it  is  necessary  to  enter  000  and  confirm  with 

#

;  the  successful 

operation is signalled by 

OK

, otherwise 

ErrProc

;

Press key 

4

 on the keyboard and confirm with 

#

If the operation is successful, the system signals 

OK

, otherwise 

ErrProc

Permits to enable the keys, after a previous disabling, automatically recovering the key code assigned in a first 
time.

1. Enter the administrator code and confirm with

#

.

2. Press key 

2

 on the keyboard and confirm with 

#

.

3. If the operation is successful, the system signals 

OK

, otherwise 

ErrProc

.

4. Press the keys (1, 2,…, 9) corresponding to the channels that must be enabled. If you press the key 

0

 or 

the key  , the system will answer with the signal 

Err

.

*

5. Confirm with 

#

.

6. The  system  records  the  configuration  set,  answers  with  a  signal 

SuccProc

  and  goes  back  to  the 

Administrator menu.

Now  you  can  go  on  with  the  other  options  or  execute  the  Esc  procedure  or  let  the  system  execute  it 
automatically.

ADVANCED Mode

ADVANCED Mode

ADVANCED Mode

ADVANCED Mode