Bandit
Copyright 11/10
PAGE
MODEL 490
MAINTENANCE SECTION
WEEKLY CHECK LIST
O.K. Repaired
1) Check anvil clearance, tightness, and wear.
2) Check alternator and fan belts on engine (if equipped).
3) Check wheel lynch pins. Check and retighten wheel lug nuts and bolts.
4) Check and retighten fuel tank mount bolts.
5) Lubricate steel friction areas: pivoting, hinged, sliding, & rotating areas
(i.e. castor wheel mount bar, discharge flipper, etc).
MONTHLY CHECK LIST
O.K. Repaired
1) Grease castor wheel pivot bushings (1 to 2 shots).
2) Check discharge, and infeed hopper for wear.
3) Check, retighten chipper bearing and chipper sheave bolts.
4) Grease wheel bushings (1 to 2 shots).
5) Grease wheel bearings - keep full (towable model only).
6) Check and fill tires to rated pressure (towable model only).
3 MONTH CHECK LIST
O.K. Repaired
1) Grease swivel plates for discharge as needed.
CHECK CHIPPER DRUM ASSEMBLY FOR
CONDITION OF KNIFE BOLT THREADS,
SECURE WELDS, TORQUED BOLTS,
EXCESSIVE WEAR AND IMPACT CRACKS.
IF PROBLEM FOUND CONTACT CHIPPER
MANUFACTURER, OR AUTHORIZED CHIPPER
DEALER.
WHEN YOU CHANGE CHIPPER KNIVES
WARNING
YEARLY CHECK LIST
O.K. Repaired
1) Inspect and clean wheel hub bearings, cups, and seals. Grease wheel hub
bearings. Replace seals if ever removed. (towable model only)