8
Copyright 3/20
Bandit
MODEL 1425
SAFETY PROCEDURES
SAFETY PROCEDURES
NEVER sit, stand, lay, climb or ride anywhere
on this machine while it is running, operating, or in
transit. You will be injured.
DANGER
!
Avoid moving parts. Keep hands, feet, and clothing
away from power driven parts. Keep all guards and
shields in place and properly secured.
DANGER
!
DANGER
!
Keep hands clear of all pinch points.
DANGER
!
Do not touch hot machine surfaces. The machine
surfaces may be hot due to the machine operating
recently or the machine setting in the sunlight.
Always block the tires and the machine tongue
whenever the machine is unhooked for operation.
DO NOT rely on the tongue jack for operational
stabilization.
DANGER
!
Tongue jacks or optional rear stabilizers, whether
hydraulic or manually operated are designed to
stabilize the machine. The tongue jack or rear
stabilizers are not designed to hold the machine
off the ground at any time. Install secure blocking
and / or chocking as needed. Before transporting
the machine, ensure the tongue jack and rear
stabilizers are fully retracted and secured in the
transport position.
NOTICE
Never stand at the entrance or sides of the infeed
conveyor. Never attempt to manually dislodge
material located on the infeed conveyor while the
machine is running. Never raise the feedwheel yoke
and look inside or look down infeed conveyor while
machine is running. Entanglement with the infeed
conveyor can cause serious injury. Stay away from
the infeed conveyor during operation. If the conveyor
drive is not shut off a stalled conveyor may restart
unexpectedly as the obstruction is removed.
DANGER
!
Entanglement in the discharge belt conveyor or
infeed conveyor can cause serious injury. Stay away
from the conveyors during operation. If the conveyor
drive is not shut off, a stalled conveyor may restart
unexpectedly as the obstruction is removed. Avoid
the discharge belt conveyor and infeed conveyor
area. Ejected material can cause serious injury.
Stay away! Stay clear of thrown and falling objects.
Take the following precautions to avoid injuries
from thrown and falling objects: Wear all applicable
safety equipment. Do not approach the restricted
areas while the machine is in operation or you will
be injured. Do not leave controls unattended while
the machine is running. locate the machine a safe
distance from buildings, public roads, and populated
areas.
DANGER
!
D-83 11/19
DANGER
!
DO NOT APPROACH THE RESTRICTED
AREAS WHILE THE MACHINE IS OPERATING
OR YOU WILL BE INJURED.
50 ft. (15m)
30 ft. (9.1m)
15 ft.
(4.6m)
15 ft.
(4.6m)
INFEED
DISCHARGE
