Bandit
29
Copyright 12/18
MODEL ZT1844
1. Grease cylinder lug pin bushings
:
Grease cylinder lug pin bushings with 1 to 2 shots of
EP-2Lithiumtypegrease.Wipeoffexcessgrease.
Excessive grease will attract dirt.
2. Lubricate all steel friction areas:
:
Lubricate all steel friction areas including , but not
limited to pivoting, hinged, sliding, rotating areas on
the machine (i.e. cutter wheel guard, control box
doors, etc.).
3. Check set screws in bearings:
Check set screws in cutter wheel and jack shaft
bearings for tightness.
4. Check alternator and fan belts on engine (as
applicable):
Adjust and maintain per the engine manufacturer’s
manual.
WEEKLY MAINTENANCE
1. Check grinder bearings and grinder sheaves:
Check and retighten all bearing bolts and belt sheave
bushings to correct torque.
2. Check bearing and bearing lock collars:
Check and retighten bearing lock collars to correct
torque.
MONTHLY MAINTENANCE
3. Check hydraulic function pressures:
Check, reset and maintain all hydraulic function
pressure settings to a maximum of the specified
PSI (bar). This will give you the best performance
from the hydraulic system.
4. Check stump grinder slewing ring bearing:
Check and retorque the stump grinder slewing ring
bearing bolts.
3 MONTH MAINTENANCE
1.
Hydraulic oil filter:
Must be replaced after FIRST 10 HOURS OF
OPERATION, USE A 10 MICRON FILTER. After
firstchangereplaceoilfilterevery3monthsor400
hours. Located in the hydraulic tank.
3. Hydraulic oil:
Changehydraulicoilandflushthehydraulicreservoir
tank.
4. Hydraulic suction screen(s):
Change hydraulic suction screen(s) yearly or every
2000 hours.
YEARLY MAINTENANCE
1. Swing Out Console Pivot:
Grease swing out console pivot once every year
1-2shotswithanEP-2Lithiumtypegrease.Wipeoff
excess grease.
Excessive grease will attract dirt.
2. Fuel tank:
Drain and clean the fuel tank yearly.
MAINTENANCE
Summary of Contents for ZT1844
Page 7: ......
Page 21: ...Bandit 19 Copyright 12 18 MODEL ZT1844 7 8 9 10 11 15 CONTROLS CONTROLS COMPONENTS cont 16...
Page 59: ...Bandit 57 Copyright 12 18 MODEL ZT1844 SERVICE RECORD SERVICE RECORD DATE DESCRIPTION AMOUNT...
Page 60: ...Bandit 58 Copyright 12 18 MODEL ZT1844 SERVICE RECORD DATE DESCRIPTION AMOUNT SERVICE RECORD...