THE MENU SYSTEM
The menu system is used for adjusting the personal settings of your Reference 5 S2. The setup of your
Preamplifier Tuner can be done by navigating through the menu system via the front panel or remote control.
If you desire to use a PC to setup your Reference 5 S2, BKcSuite setup software can be downloaded from
our website at
The main menu navigational flow chart diagram for the menu sys-
tem is located on
of this manual. The following are general instructions for using the menu system
through the front panel or remote control.
MENU button -
The MENU button on the remote control will activate the menu system. Pressing simultane-
ously the PRESET and ENTER buttons from the front panel will also activate the menu. Once you are in the
menu system, the MENU button will step you back to the next higher-level menu. If you are already at the
highest level, the MENU button will exit from the menu system. From the front panel, press the PRESET and
ENTER buttons simultaneously will step you back to the next higher-level menu.
UP / DOWN ARROWS
- Once you are in the menu system, use the UP / DOWN arrows from the remote or
front panel to step through the menu selections.
SELECT (remote) or ENTER (remote or front panel) -
Some menu selections allow the next level of the
menu to be accessed. Pressing SELECT or ENTER will activate the next menu level.
LEFT / RIGHT ARROWS (remote) or Volume Knob (front panel) -
To change menu parameters, press the
LEFT or RIGHT arrows to change the setting. There are no LEFT or RIGHT arrows on the front panel. Use
the Volume Knob when operating the menu from the front panel. The volume knob acts as the LEFT or
RIGHT arrows.
TEXT EDITING -
Some menu selections will require you to edit text. Use the UP / DOWN arrows to change
the current (blinking) character. Use the LEFT / RIGHT arrows (or Volume Knob) to move to another charac-
ter position.
DESCRIPTIONS OF MAIN MENU SELECTIONS
HEADPHONE ON / OFF
The MAIN MENU Headphone selection activates or deactivates headphone mode. The preamplifier is default
set so when the unit is in headphone mode, the 12VDC control is off, therefore turning off the external amplifi-
er. The mode button on the remote control will also toggle headphone mode ON or OFF.
HELP
The HELP GUIDE summarizes the basic menu operations described herein. The guide will automatically
scroll through each line.
PRODUCT-INFO
The PRODUCT INFORMATION selection that provides basic information on your Preamplifier Tuner. The
information will automatically scroll through each line.
SETUP
The SETUP selection allows the user to select from:
••
Favorite Presets
••
Source Names
••
Source Levels
••
Preset Operation
••
Display Setup
••
Memory Options
••
Advanced Setup
12
MENU DESCRIPTION
