6
Input Connections through RCA
The AV Brick Amplifiers have inputs that are designed to accept line level
audio from preamplifier or receiver RCA output connections. There are two
RCA inputs from the preamplifier’s line level outputs, one left (white) and one
right (red) which correspond to the left and right outputs on the preamplifier.
There are many uses for the brick amplifiers. Two are shown.
CT 600.1 Zone Line Outputs
AV Amplifier
Level Control
The AV 30.2, 60.2 and 100.2 have back panel level controls. Two volume
controls are provided on the back of the AV amplifiers allowing for separate
control of the left and right signals. The outer level control adjusts the vol-
ume of the right channel. The inner level control adjusts the volume of the
left channel.
One option is using the output from Zone E on a CT 600.1 going into the Audio
Input on the AV Amplifier.
Another option would be to use the Zone B outputs from a Ref 50 S2 to the
Audio Input on the AV Amplifier.
AV Amplifier
Ref 50 S2 Zone B Outputs (set to fixed)
The level control on the back panel
of the AV Amplifiers
The level control showing functional-
ity of changing the volume of the left
and right channels.
