Advanced Features
21
Channel Control “Punch Through”
You can program so that either the SAT or V2 Channel Controls (CHANNEL UP
and DOWN) will also operate in other modes on the remote control.
Example: Change CHANNEL UP and DOWN on your satellite while the remote
is in the TV mode.
Note: When this feature is active, SAT or V2 CHANNEL UP and DOWN will
override any existing channel controls in that mode.
To Set-Up
1.
Select the mode that you wish to program for Channel Control “Punch
Through.”
2.
Press the corresponding Device and MUTE buttons, simultaneously.
SET will appear in the LCD.
3.
Press the VOLUME DOWN button. PUNCH will appear in the LCD.
4.
Press either the SAT Device Button to set-up for SAT Channel Control
(Satellite) or the V2 Device Button to set-up for V2 Channel Control
(Cable). Either SAT or V2 will flash in the LCD, depending on the
Device Button selected.
SAT or V2 Channel Controls will now override the original CHANNEL UP
and DOWN in this mode.
To Return to the Original Setting
1.
Select the mode that you want to turn off the Channel Control “Punch
Through.”
2.
Press the corresponding Device and the MUTE button, simultaneously.
SET will appear in the LCD.
3.
Press the VOLUME DOWN button. PUNCH will appear in the LCD.
4. Press the same Device button, again. The Device Mode will flash in the
LCD.
The V1 (VCR) or V2 (cable) Channel Control “Punch Through” is now
turned off. The CHANNEL UP and DOWN of the original device will now
operate on the remote control.
Summary of Contents for AV7.1
Page 1: ...B K AV7 1 Preprogrammed Learning Remote Control...
Page 2: ......
Page 6: ...Using Your Remote 4 A Function Table Reference...
Page 49: ......
