9
FRONT PANEL
POWER
ON/OFF
A/V Receiver
SOURCE
B&K Components, Ltd.
SLEEP
PRESET
DOWN
UP
MODE
MENU
ENTER
AVR 507
HEADPHONE
DVD THX SUR EX
M
U
L
C A S F I L
S U R R O U N D
E X T E N D E D
1
1
2
3
4
5
6
BK COMPONENTS
1. Headphone Jack
- Stereo headphones having a standard ¼ inch binaural plug can be connected to the
headphone output. The receiver must be on and in HEADPHONE Mode for proper headphone operation.
2. Front panel buttons
SLEEP
Puts the receiver in standby (low power) mode.
PRESET
Steps through audio / video presets for instant recall of setups.
Pressing ENTER recalls the preset.
ENTER
Confirm selection or display current status of the receiver.
DOWN
Step through menus and audio modes.
UP
Step through menus and audio modes.
MODE
Steps through the audio modes.
MENU
Enter / exit menu system
3. Main power switch
- Removes all power to the receiver. Normal operation of the receiver requires the power
switch to remain on. Use the Sleep button for daily on and off of the receiver. It places the unit in standby mode
that allows turning back on with the remote control. Turn the receiver off with the main power switch when not
using the receiver for an extended period of time.
4. Volume control
- For controlling system volume. Turning the encoder-type volume control clockwise increases
the volume level, counterclockwise decreases the volume level. The volume knob is also used to change other
receiver settings. See THE MENU SYSTEM and OPERATION
5. Display
- The receiver display is a 16 character alphanumeric fluorescent display. Displays current status of
receiver and any changes being performed.
6. Source
- For controlling source selection. Turning the encoder-type selector clockwise or counterclockwise will
navigate through the selection of all input sources and the AM and FM tuner.
