4
Click on the satellite # keys to record the channel number you want. If you forget which favorite you are
programming, remember that the name of the favorite is displayed above the macro list of steps.You can open
the Hard Button window if the IR database was used (the IR database automatically installs # commands in
both the LCD pages and the Phantom Hard Buttons).
5
Add delay if needed. You should test the first favorite
thoroughly for any need for delay. Components vary widely
in their response time. Some brands will be fine with no
delay step in between IR commands. Other brands require
delays between commands. However, if the channel
favorite has two identical digits, you will most certainly
require delay between the two identical commands.
6
Click on the SAVE icon and continue to the next Favorite
until all are complete.
Inserting Macros (Copying or Cloning a Macro)
You can often speed programming by instantly inserting all of the steps of a previously programmed macro as the
starting point of a new macro.The inserted steps are completely editable, without changing the original macro.
1
Do not start recording at the new location. Simply select
the button where you would like the macro inserted.Then
click on the IMPORT MACRO button.
35
Type in Section Title
S
B
I M P LY
E T T E R !
B K
&
T
H
E
B
&
K
A
U
T
O
M
A
T
E
D
H
O
U
S
E
Programming Tutorial
4
6
