3 Now, select the Keypad Feedback tab and choose the position each source will occupy
on the Keypad’s MAIN MENU pages. Simply pull down the list box for each position and
select one of the CT610/310/600 sources. As each source is assigned a position, it
dissapears from the list boxes of the other positions.
If you wish to reposition a source, first set the old position to NONE, then the source
name you want will reappear in the lists for the other positions.
4 Record the list of sources, the names and the Keypad positions on your worksheets.
7
Type in Section Title
S
B
I M P LY
E T T E R !
B K
&
T
H
E
B
&
K
A
U
T
O
M
A
T
E
D
H
O
U
S
E
Programming Considerations for the CT610/310/600
Important Note!
Only assign a keypad position to an input that will be used by
the keypads. If an input does not have a source connected to it, don’t assign a
keypad position to it.
The dedicated inputs in this example system have all been connected to a stack
of six satellite receivers, so the keypad itself will be labeled SAT in this position.
