BKcSuite Determines Device Layout for the CK1.2
Open up CKEditor and go to program step #1, Create and Name Devices (described in detail on the following
pages). Simply refer to your notes and create devices in the same positions you recorded in your worksheets.
8
Type in Section Title
S
B
I M P LY
E T T E R !
B K
&
U
S
I
N
G
C
K
E
D
I
T
O
R
T
O
P
R
O
G
R
A
M
Programming Considerations for the CT610/310/600
Source Devices Created
In this example, the devices
corresponding to the settings
you made
for the receiver
are
made.This master file will be
used as a starting point for
every keypad. In the empty
device spots you may insert
devices for local TV’s etc.
In this example, the Dedicated
Input is labeled SAT since each
zone has it’s own dedicated
DSS receiver connected to the
dedicated inputs.
Local Devices Added
In this example, the bedroom
zone incorporates a television
set, a Lutron Graphic Eye (IR
controlled lighting), and Makita
IR controlled drapes. Other
zones will not have these
devices added to them. Only
the bedroom keypads need
them.
