0.475”
Keypad Dimensions
White and Beige Faceplates
Mounting
7
S
B
I M P LY
E T T E R !
B K
&
Once programming is complete and downloaded to each keypad, finish
the installation by installing either the white or the beige faceplate. The
wall plate magnetically fits into place, first from the top and finishing with
the bottom.
After connections are made, the CK2.2 installs into a standard double
gang J-Box or an open backed double gang trim ring with the screws
provided. If you opt to use a closed J-Box, it must be a minimum of 2 3/4”
deep to accomodate standard RJ-45 plugs in the rear. It is easiest to
mount the keypad in an open backed trim ring as shown below.
Often the best solution to mounting a B & K key-
pad are the mounting plate brackets for Low
Voltage Class 2 devices made by Caddy, B-Line
etc. Of course, enclosed J-Boxes can be used,
they must be deep enough to accomodate the
depth of the RJ-45 connectors plugged into the
rear of the keypad (2 3/4”).
3.563”
2.875”
4.687”
4.75”
2.265”
