Connecting to a CT Receiver
Standard CT Receiver System
2
S
B
I M P LY
E T T E R !
B K
&
Keypads connect to the Zone Control Connectors on the CT Receiver
using CAT-5 cables. CK 2.2 keypads can be coupled with CK 1.1 key-
pads in any zone.
IR Flashers for A/V components
as connected to the IR output
corresponding to their A/V Input.
The CT Receiver
amplifier channels
connect to each
zone speakers via
speaker wire. Please
see the CT Receiver
manual for more
information.
Keypads connect to the CT Receiver using a
straight CAT-5
at the
Zone Control RJ-45 ports. There is one port for each hardware zone,
labeled A through F on the CT 600.3/600.1 and A through C on the
CT300.3.
1. +12V DC IN
2. KEYPAD IR DATA OUT
3. GROUND
4. N/C
5. RS-232 RECEIVE INPUT
6. GROUND
7. STATUS IN
8. +12VDC IN
CT Receiver Zone I/O Ports (A-F)
CK 2.2 Master (In)
