CK 2.2 Keypad
Programming Manual
And
(BKC-DIP) RS232 Guide
Updated 08/13/07
Page 41 of 87
Learning IR Codes
Select the Button -
Select the button that you want to teach to by single clicking it.
Click on the LEARN Shortcut Button -
The Learn shortcut button stays depressed
to indicate that you have selected LEARN mode.
Wait for READY to Appear -
The CK 2.2 Keypad must be connected to the PC.
Once you see the READY indicator, press and hold the corresponding button on the
original keypad while pointing it at the TOP of the CK 2.2 Keypad. When the code is
successfully learned, the window will say GOOD, confirming that the code learned
“
correctly.
” Actually, the GOOD means that the code
might be good....
Press the test
icon and point the connected CK 2.2 Keypad at the component to test if it really is good!
Re-teach as necessary.
***
Click on SAVE -
You must click on SAVE to save the LEARNED command.
