10
USING SMALL SPEAKERS
Connect the Preamplifier outputs to your external amplifier(s) or powered speakers.
Shown below is a typical Preamplifier output setup for use with small speakers
:
Note: the use of a subwoofer is not optional and is needed to reproduce low frequency audio material.
POWERED
SUBWOOFER
Front Right
Front Left
PLUS
MINUS
(-)
(+)
LEFT SPEAKER OUTPUT
PLUS
MINUS
(-)
(+)
LEFT INPUT
RIGHT INPUT
Power Amplifier
MONO
L+R
HIGH
PASS
FULL
RANGE
SUB
PREAMP OUTPUTS
RIGHT SPEAKER OUTPUT
or
SUB output -
Connect an RCA cable from the Preamplifier Tuner’s SUB output. If your subwoofer does not
contain its own amplifier you will need to purchase an external B&K or other power amplifier. Connect the
Preamplifier Tuner’s SUB output to the audio input of the external amplifier. Connect the external amplifier’s
speaker output to your subwoofer. If you prefer to use your subwoofer’s internal crossover then connect the
Preamplifier Tuner’s full range outputs to the sub’s input and connect your power amplifier or powered speaker’s
to the sub’s high-pass output.