23
FREQUENTLY ASKED QUESTIONS
My collection of equipment differs from the labels on the back of my Preamplifier Tuner, how can I hook
them up?
Your Preamplifier Tuner provides 5 identical sets of inputs - V1, V2, TV, DVD and CD. It is convenient to
connect components as labeled on the back of your Preamplifier Tuner, but since all the inputs are identical, you
can connect any compatible source to any set of inputs. For example, you can connect a DAT player to V1
instead of a VCR. You can program your Preamplifier Tuner to display any 5 character names for any input (see
SETUP - SOURCE NAMES).
The sixth input, TAPE, is primarily intended for analog recorders such as a cassette deck, DAT or Mini
Disc. If you have a three-head cassette or reel-to-reel tape deck you will prefer the TAPE input since it allows a
full tape monitor capability. Tape monitor allows you to listen to what is actually on the tape as you are recording
it.
The Loudness control does not work at high volume settings. Is this normal?
Your Preamplifier Tuner’s Loudness control is designed to automatically shape the audio signal for
increased clarity and intelligibility during LOW VOLUME settings (below -15 dB). The control circuit is designed to
gradually reduce its effect on the audio signal as the volume is increased. Loudness is completely removed as the
level approaches 0 dB.
Can I connect a phonograph directly to my Preamplifier Tuner?
No, you will need a separate outboard phono preamplifier. The output of the phone preamp can then be
connected to any analog input on your Preamplifier Tuner. There are several high-quality outboard phono
preamps available such as the B&K Phono 10. Talk to the dealer where you purchased your Preamplifier Tuner.
