LTE Outdoor CPE
EN-11
Assemble the Optional RJ-45 Water
Resistant Kit
1.
Unpack the RJ-45 water resistant kit.
2.
Assemble one end of the Ethernet cable as shown in the illustration.
NOTE
The Ethernet cable is not included in the package.
For details on the head assembly, refer to the Quick Installation Guide that is
included with the RJ-45 head water resistant kit.
Grounding the CPE
For safety use, use the earth ground terminal to ground the CPE housing before
making any connections.
You need the following:
Spring washer
M 4x8
L
screw
NOTE
The spring washer and M4x8L screw are not included in your package.
To ground the CPE:
1.
Insert the washer to the M4x8L screw.
2.
Attach the screw halfway into the
earth ground terminal.
3.
Insert the grounding cable under
the washer.
4.
Tighten the screw.
Summary of Contents for E500 Series
Page 1: ...EN 1 P N 65012500011 Rev A...
