Using Web-based Management
13
The E600 Series CPE uses the network domain 192.168.2.X, for any
downstream connections, all devices should avoid using this network
domain otherwise there might be conflicting IP addresses which will
cause communication failure.
If you cannot connect to the network, please follow the steps below to
set the APN manually:
1. Go to
Network Settings
>
WWAN Setting
>
APN Profile Settings
to
enter the APN profile name, and then click
Add
.
2. Enter the
APN
,
User Name
, and
Password
, and then click
Save
.
3. Go to
Network Settings
>
WWAN Setting
>
Network Settings
and
change the
APN
field to
Manual
, then select the profile name you added
and click
Apply
. The changes will be applied after the system is
rebooted.
If PIN verification on you SIM card is enabled, go to
Network Settings
> Mobile Settings > UICC/SIM PIN Management
to unlock the PIN
code.
If a SIM card is reinserted you must restart the CPE to read the SIM
card properly.
For more detailed information please go to
http://www.bandrich.com/UM/E600_ Series.pdf
to download the user
manual.
