Created: 3/21/2014
8200-118
E1L Stair Climber Assembly Instructions
Page 2 of 2
1. To add stair climbers to your hand truck first remove the wheels and set aside.
E1L Stair Climber Assembly Instructions
3. Fasten the top of the stair climber (A) to the
frame using the outer clip (B) (sliding the clip
tabs into the frame channel) and the inner
clip (C ) securing with the 2” bolt (E) and lock
nut (F). Tighten and repeat on opposite
side.
4. Reattach wheels.
2. Fasten the lower end of the stair climber (A) to the inside of the wheel bracket. For disc brake hand trucks
fasten the stair climber to the outside of the axle bracket . Secure the stair climber with 1-3/4” bolts (D)
and lock nuts (F).
Installation with 8” wheels,
with or without tread brakes.
Installation with 10” wheels,
with or without tread brakes.
