23
NMLM1000
In
more
detail . . .
Mowing
1. Make sure that the lawn is clear of stones, sticks, wire or other objects that could
damage the product or its motor.
2. Do not cut wet grass because it tends to stick to the underbody of the product,
preventing the proper discharge of grass clippings, and it could also cause you to
slip and fall.
3.
Never cut off more than one-third of the total length of the grass for a healthy lawn.
In the autumn, lawns should only be cut as long as there is growth.
4. Slowly push the product forward.
5.
Mow in slightly overlapping rows. The most effective pattern for mowing lawns is
straight lines along one of the sides. This will keep the rows even and ensures that
all the lawn is cut without missing any spots (Fig. 11).
Fig. 11
6. Circle around beds. When reaching a bed in the middle of the lawn, cut a row or two
around the circumference of the bed.
7. Pay special attention when changing direction.
WARNING!
SIf the product strikes a foreign object stop the motor! Switch the
product off, disconnect it from the power supply and let it cool down. Inspect the
product thoroughly for damage! Have any damage repaired before restarting!
Extensive vibration of the product during operation is an indication of damage!
Stop the motor. The product should be promptly inspected and repaired!
After use
1.
Switch the product off, disconnect it from the power supply and let it cool down.
2. Check, clean and store the product as described below.
Operation
