X20 system modules • Digital output modules • X20DO8322
X20 system User's Manual 3.10
1245
4.15.23 X20DO8322
4.15.23.1 General information
The module is equipped with 8 outputs for 1-wire connections and designed for source output wiring.
•
8 digital outputs
•
Source connection
•
1-wire connections
•
Integrated output protection
4.15.23.2 Order data
Model number
Short description
Figure
Digital output modules
X20DO8322
X20 digital output module, 8 outputs, 24 VDC, 0.5 A, source, 1-
wire connections
Required accessories
Bus modules
X20BM11
Bus module, 24 VDC keyed, internal I/O supply continuous
Terminal blocks
X20TB12
X20 terminal block, 12-pin, 24 VDC keyed
Table 398: X20DO8322 - Order data
4.15.23.3 Technical data
Product ID
X20DO8322
Brief description
I/O module
8 digital outputs 24 VDC for 1-wire connections
General information
B&R ID code
0xA4AC
Status indicators
I/O function per channel, operating state, module status
Diagnostics
Module run/error
Yes, using status LED and software
Outputs
Yes, with status LED and software status (output error status)
Power consumption
Bus
0.26 W
Internal I/O
0.8 W
Additional power dissipation caused by the actua-
tors (resistive) [W]
1)
+0.42
Electrical isolation
Channel - Bus
Yes
Channel - Channel
No
Certification
CE
Yes
cULus
Yes
cCSAus HazLoc Class 1 Division 2
Yes
ATEX Zone 2
Yes
KC
Yes
GL
Yes
GOST-R
Yes
Digital outputs
Design
FET positive switching
Nominal voltage
24 VDC
Switching voltage
24 VDC -15% / +20%
Nominal output current
0.5 A
Total nominal current
4.0 A
Connection type
1-wire connections
Output circuit
Source
Output protection
Thermal cutoff for overcurrent or short circuit (see value "Peak short circuit current")
Internal inverse diode for switching ind. loads (see section "Switching inductive loads")
Diagnostic status
Output monitoring with 10 ms delay
Leakage current when switched off
5 µA
Table 399: X20DO8322 - Technical data
Summary of Contents for X20 System
Page 2: ......
