X20 system modules • Digital output modules • X20DO9322
X20 system User's Manual 3.10
1295
4.15.28.9.3 Digital outputs
The output status is transferred to the output channels with a fixed offset (<60 µs) in relation to the network cycle
(SyncOut).
4.15.28.9.3.1 Switching state of digital outputs 1 to 12
Name:
DigitalOutput
DigitalOutput01 to DigitalOutput12
The switching state of digital outputs 1 to 12 are stored in this register.
Function model 0 - Standard only:
The "packed outputs" setting in the AS I/O configuration is used to determine whether all of these registers' bits
should be set up individually as data points in the AS I/O mapping ("DigitalOutput01" through "DigitalOutput12") or
whether these registers should be displayed as an individual UINT data point ("DigitalOutput").
Data type
Value
UINT
Packed "DigitalOutput" values
USINT
See bit structure
Bit structure:
Register 2, Offset 0:
Bit
Name
Value
Information
0
Digital output 01 reset
0
DigitalOutput01
1
Digital output 01 set
...
...
0
Digital output 08 reset
7
DigitalOutput08
1
Digital output 08 set
Register 3, Offset 1:
Bit
Name
Value
Information
0
Digital output 09 reset
0
DigitalOutput09
1
Digital output 09 set
...
...
0
Digital output 12 reset
3
DigitalOutput12
1
Digital output 12 set
Summary of Contents for X20 System
Page 2: ......
