X20 system modules • Digital signal processing modules • X20DS1828
1356
X20 system User's Manual 3.10
HfRs485Settings
Names (pChannelName):
HfRs485Settings
This register temporarily stores the current network configuration expected by the slave. The register value is
specifically structured for HIPERFACE.
Data type
Value
USINT
See bit structure
Bit structure:
Bit
Name
Information
0-2
Speed code
0-6
Baud rate:
1 (001 b) ... 1200 baud
2 (010 b) ... 2400 baud
3 (011 b) ... 4800 baud
4 (100 b) ... 9600 baud
5 (101 b) ... 19200 baud
6 (110 b) ... 38400 baud
Bus controller default: 4
3
Reserved
-
0
No parity bit
4
Number of parity bits
1
One parity bit (default)
0
Even (default)
5
Type of parity bit
1
Odd
0
Timeout 11/baud rate
6
Timeout behavior
1
Timeout 4*11/baud rate (default)
0
Bus
7
Network behavior
1
Direct connection (default)
HfEncoderType
Names (pChannelName):
HfEncoderType
This register temporarily stores the ID of the current encoder. The register value is structured specifically for each
slave and must be looked up in the encoder's data sheet.
Data type
Value
USINT
0 to 255
HfEepromSize
Names (pChannelName):
HfEepromSize
This register stores the size of the EEPROM being used. The number of 16-byte blocks is specified.
Data type
Value
USINT
0 to 255 [16-byte blocks]
HfOptionFlags
Names (pChannelName):
HfOptionFlags
This register stores slave-specific hardware and software settings.
Data type
Value
USINT
0 to 255
HfFreeMemory
Names (pChannelName):
HfFreeMemory
This register shows the number of free 16-byte blocks remaining on the HIPERFACE slave.
Data type
Value
USINT
0 to 255 [16-byte blocks]
Summary of Contents for X20 System
Page 2: ......
