X20 system modules • Fieldbus CPUs • X20XC0201, X20XC0202, X20XC0292
1750
X20 system User's Manual 3.10
Product ID
X20XC0201
X20XC0202
X20XC0292
Relative humidity
Operation
5 to 95%, non-condensing
Storage
5 to 95%, non-condensing
Transport
5 to 95%, non-condensing
Mechanical characteristics
Note
Order 1x X20TB12 terminal block separately
Order 1x X20PS9500 or X20PS9502 power supply module separately
Order 1x X20BB3x/4x fieldbus CPU base separately
Spacing
6)
X20BB3x
62.5
+0.2
mm
X20BB4x
87.5
+0.2
mm
Table 526: X20XC0201, X20XC0202, X20XC0292 - Technical data
1)
The real-time clock is buffered for approx. 1000 hours by a gold foil capacitor. The gold foil capacitor is completely charged after 18 continuous hours of
operation.
2)
This FRAM stores its contents ferroelectrically. A backup battery is therefore not necessary.
3)
Not buffered.
4)
For technical data, see the data sheet for the X20PS9500 power supply module.
5)
For technical data, see the data sheet for the X20PS9502 power supply module.
6)
Spacing is based on the width of the X20BB3x/4x fieldbus CPU base. The CPU always requires up to two fieldbus modules and one supply module X20PS9500
or X20PS9502.
4.21.2.4 LED status indicators
Figure
LED
Color
Status
Description
Green
On
Application running
Red
On
SERVICE mode
R/E
Off
1)
Yellow
On
SERVICE mode
RDY
Off
1)
Table 527: X20XC020x - Status LEDs
1)
BOOT mode: R/E and RDY LEDs are off and the power supply LED is blinking
Figure
LED
Color
Status
Description
Green
On
Application running
Red
On
SERVICE mode
R/E
Off
1)
On
SERVICE mode
RDY
Yellow
Off
1)
On
A link to the peer station has been established.
L/A
Green
Blinking
A link to the peer station has been established. Indicates Ethernet activity is
taking place on the bus.
Table 528: X20XC0292 - Status LEDs
1)
BOOT mode: R/E and RDY LEDs are off and the power supply LED is blinking
Summary of Contents for X20 System
Page 2: ......