X20 system modules • Other functions • X20CM4810
X20 system User's Manual 3.10
2067
4.26.2 X20CM4810
4.26.2.1 Order data
Model number
Short description
Figure
Other functions
X20CM4810
X20 analog input module for vibration measurement and
analyse of condition monitoring exercises. 4 IEPE analog input
51,5625 kHz sampling frequency 24 bit converter resolution
Required accessories
Bus modules
X20BM31
X20 bus module for double-width modules, 24 VDC keyed, in-
ternal I/O supply continuous
Terminal blocks
X20TB12
X20 terminal block, 12-pin, 24 VDC keyed
Optional accessories
Cables
0ACC0020.01-1
Cable for acceleration sensor, length 2 m, 2x 0.34 mm², M12
socket on sensor side, can be used in cable drag chains, UL
listed
0ACC0050.01-1
Cable for acceleration sensor, length 5 m, 2x 0.34 mm², M12
socket on sensor side, can be used in cable drag chains, UL
listed
0ACC0100.01-1
Cable for acceleration sensor, length 10 m, 2x 0.34 mm², M12
socket on sensor side, can be used in cable drag chains, UL
listed
0ACC0150.01-1
Cable for acceleration sensor, length 15 m 2x 0.34 mm², Female
M12 connector on sensor side, cable, UL listed
0ACC0200.01-1
Cable for acceleration sensor, length 20 m, 2x 0.34 mm², M12
socket on sensor side, can be used in cable drag chains, UL
listed
Sensors
0ACS100A.00-1
Acceleration sensor, nominal sensitivity 100 mV/g, top exit
0ACS100A.90-1
Acceleration sensor, nominal sensitivity 100 mV/g, side exit
Table 720: X20CM4810 - Order data
4.26.2.2 Technical data
Information:
The X20CM4810 module is only supported by Automation Studio 3.0.90.x and Automation Runtime
versions >= J3.09, J4.01 and O4.02.
4.26.2.2.1 Technical data
Product ID
X20CM4810
Short description
I/O module
X20 4-channel analog input module for vibration measurement and analysis of condition monitoring tasks
General information
Isolation voltage between channel and bus
500 V
eff
Nominal voltage
24 VDC ±20%
B&R ID code
0xC8F9
Status indicators
Run, error, vibration inputs 1 to 4
Diagnostics
Module run/error
Yes, using status LED and software
Power consumption
Bus
0.01 W
Internal I/O
2.5 W
Electrical isolation
Channel - Bus
Yes
Channel - Channel
No
Certification
CE
Yes
cULus
Yes
GOST-R
Yes
Analog inputs
Quantity
4
Input type
IEPE sensor: Acceleration
Digital converter resolution
24-bit
Table 721: X20CM4810 - Technical data
Summary of Contents for X20 System
Page 2: ......
