X20 system modules • Other functions • X20PD2113
2320
X20 system User's Manual 3.10
4.26.9 X20PD2113
4.26.9.1 General information
The potential distributor module with feed can provide 6x 24 VDC and 6x ground connections from the internal
I/O supply on the terminals. This module can also be used instead of a special feed module for the internal I/O
supply. The internal 24 VDC supply is connected to the terminal connections through a replaceable microfuse for
protection. The 24 VDC feed and the functionality of the fuse are monitored.
Information:
Since the 6x 24 VDC terminals are interconnected and the fuse is located between the terminals and
the internal I/O supply, the terminal potentials are not protected against short circuits from an external
feed. If using an external feed, the respective 24 VDC terminals must be protected with an external
fuse. In this case a X20BM01 bus module should be used.
•
Integrated exchangeable microfuse
•
Monitoring of the fuse
•
Potential for routing as needed
•
Can be used as feed module for the I/O supply
4.26.9.2 Order data
Model number
Short description
Figure
Other functions
X20PD2113
X20 potential distributor module, 6x GND, 6x 24 VDC, with feed
option, integrated microfuse
Required accessories
Bus modules
X20BM01
X20 power supply bus module, 24 VDC keyed, internal I/O sup-
ply interrupted to the left
X20BM11
Bus module, 24 VDC keyed, internal I/O supply continuous
Terminal blocks
X20TB12
X20 terminal block, 12-pin, 24 VDC keyed
Table 795: X20PD2113 - Order data
Summary of Contents for X20 System
Page 2: ......
