Coated modules • Analog output modules • X20cAO2437
2504
X20 system User's Manual 3.10
5.4.2 X20cAO2437
5.4.2.1 General information
With regard to hardware and software, this module is identical to the uncoated module of the same name.
The only differences are the:
•
Model number
•
Module ID
•
Environmental conditions
•
Additional coating (see chapter 5 "Coated modules")
For a complete description of the hardware and software, see 4.4.2 "X20AO2437".
5.4.2.2 Order data
Model number
Short description
Figure
Analog outputs
X20cAO2437
X20 analog output module, coated, 2 outputs, 4 to 20 mA / 0 to
20 mA or 0 to 24 mA 16-bit converter resolution, single channel
electrically isolated
Required accessories
Bus modules
X20cBM11
X20 bus module, coated, 24 V keyed, internal I/O supply con-
tinuous
Terminal blocks
X20TB12
X20 terminal block, 12-pin, 24 VDC keyed
Table 912: X20cAO2437 - Order data
5.4.2.3 Technical data
Product ID
X20cAO2437
Brief description
I/O module
2 analog outputs 4 to 20 mA, 0 to 20 mA or 0 to 24 mA
General information
B&R ID code
0xE1F2
Status indicators
I/O function per channel, operating state, module status
Diagnostics
Module run/error
Yes, using status LED and software
Outputs
Yes, using status LED and software
Power consumption
Bus
0.05 W
Internal I/O
1.6 W
Additional power dissipation caused by the actua-
tors (resistive) [W]
-
Electrical isolation
Channel - Bus
Yes
Channel - Channel
Yes
Certification
CE
Yes
GOST-R
Yes
Analog outputs
Output
4 to 20 mA, 0 to 20 mA or 0 to 24 mA (can be configured using software)
Digital converter resolution
16-bit
Settling time for output changes over entire range
2 ms to 20 s, can be configured using software
Data output rate
1 ms without ramp
Table 913: X20cAO2437 - Technical data
Summary of Contents for X20 System
Page 2: ......
