Coated modules • Analog output modules • X20cAO4632
X20 system User's Manual 3.10
2511
5.4.5 X20cAO4632
5.4.5.1 General information
With regard to hardware and software, this module is identical to the uncoated module of the same name.
The only differences are the:
•
Model number
•
Module ID
•
Environmental conditions
•
Additional coating (see chapter 5 "Coated modules")
For a complete description of the hardware and software, see 4.4.8 "X20AO4632".
5.4.5.2 Order data
Model number
Short description
Figure
Analog outputs
X20cAO4632
X20 analog output module, coated, 4 outputs, ±10 V or 0 to 20
mA, 16-bit converter resolution
Required accessories
Bus modules
X20cBM11
X20 bus module, coated, 24 V keyed, internal I/O supply con-
tinuous
Terminal blocks
X20TB12
X20 terminal block, 12-pin, 24 VDC keyed
Table 918: X20cAO4632 - Order data
5.4.5.3 Technical data
Product ID
X20cAO4632
Brief description
I/O module
4 analog outputs, ±10 V or 0 to 20 mA
General information
B&R ID code
0xD575
Status indicators
I/O function per channel, operating state, module status
Diagnostics
Module run/error
Yes, using status LED and software
Channel type
Yes, using software
Power consumption
Bus
0.01 W
Internal I/O
1.8 W
Additional power dissipation caused by the actua-
tors (resistive) [W]
-
Electrical isolation
Channel - Bus
Yes
Channel - Channel
No
Certification
CE
Yes
cULus
Yes
ATEX Zone 2
Yes
GL
Yes
GOST-R
Yes
Analog outputs
Output
±10 V or 0 to 20 mA, via different terminal connections
Digital converter resolution
Voltage
±15-bit
Current
15 Bit
Conversion time
50 µs for all outputs
Settling time for output changes over entire range
500 µs
Power on/off behavior
Internal enable relay for booting
Table 919: X20cAO4632 - Technical data
Summary of Contents for X20 System
Page 2: ......
