Coated modules • Analog output modules • X20cAO4632-1
X20 system User's Manual 3.10
2513
5.4.6 X20cAO4632-1
5.4.6.1 General information
With regard to hardware and software, this module is identical to the uncoated module of the same name.
The only differences are the:
•
Model number
•
Module ID
•
Environmental conditions
•
Additional coating (see chapter 5 "Coated modules")
For a complete description of the hardware and software, see 4.4.9 "X20AO4632-1".
5.4.6.2 Order data
Model number
Short description
Figure
Analog outputs
X20cAO4632-1
X20 analog output module, coated, 4 outputs, ±11 V or 0 to 22
mA, 16-bit converter resolution
Required accessories
Bus modules
X20cBM11
X20 bus module, coated, 24 V keyed, internal I/O supply con-
tinuous
Terminal blocks
X20TB12
X20 terminal block, 12-pin, 24 VDC keyed
Table 920: X20cAO4632-1 - Order data
5.4.6.3 Technical data
Product ID
X20cAO4632-1
Brief description
I/O module
4 analog outputs, ±11 V or 0 to 22 mA
General information
B&R ID code
0xE213
Status indicators
I/O function per channel, operating state, module status
Diagnostics
Module run/error
Yes, using status LED and software
Channel type
Yes, using software
Power consumption
Bus
0.01 W
Internal I/O
2.15 W
Additional power dissipation caused by the actua-
tors (resistive) [W]
-
Electrical isolation
Channel - Bus
Yes
Channel - Channel
No
Certification
CE
Yes
cULus
Yes
ATEX Zone 2
Yes
GL
Yes
GOST-R
Yes
Analog outputs
Output
±11 V or 0 to 22 mA, via different connection terminal points
Digital converter resolution
Voltage
±15-bit
Current
15-bit
Conversion time
50 µs for all outputs
Settling time for output changes over entire range
500 µs
Power on/off behavior
Internal enable relay for booting
Table 921: X20cAO4632-1 - Technical data
Summary of Contents for X20 System
Page 2: ......
