Coated modules • Bus controllers System modules • X20cPS9400
X20 system User's Manual 3.10
2525
5.6.3 X20cPS9400
5.6.3.1 General information
With regard to hardware and software, this module is identical to the uncoated module of the same name.
The only differences are the:
•
Model number
•
Module ID
•
Environmental conditions
•
Additional coating (see chapter 5 "Coated modules")
For a complete description of the hardware and software, see 4.6.3 "X20PS9400".
5.6.3.2 Order data
Model number
Short description
Figure
System modules for bus controllers
X20cPS9400
X20 power supply module, coated, for bus controller and internal
I/O supply, X2X Link supply
Required accessories
System modules for bus controllers
X20cBB80
X20 bus base, coated, for X20 base module (BC, HB, etc.)
and X20 power supply module, X20 end plates X20AC0SL1/
X20AC0SR1 (left and right) included
System modules for expandable bus controllers
X20cBB81
X20 bus base, coated, for X20 base module (BC, HB, etc.) and
X20 power supply module, with one expansion slot for an X20
add-on module (IF, HB, etc.), X20 locking plates (left and right)
X20AC0SL1/X20AC0SR1 included
X20cBB82
X20 bus base, coated, for X20 base module (BC, HB, etc.) and
X20 power supply module, with 2 expansion slots for 2 X20
add-on modules (IF, HB, etc.), X20 locking plates (left and right)
X20AC0SL1/X20AC0SR1 included
Terminal blocks
X20TB12
X20 terminal block, 12-pin, 24 VDC keyed
Table 930: X20cPS9400 - Order data
5.6.3.3 Technical data
Product ID
X20cPS9400
Brief description
Power supply module
24 VDC supply module for bus controller, X2X Link bus supply and I/O
Interfaces
1x RS232 service interface
General information
B&R ID code
0xD579
Status indicators
Overload, operating status, module status, RS232
Diagnostics
Module run/error
Yes, using status LED and software
RS232 data transfer
Yes, using status LED
Overload
Yes, using status LED and software
Power consumption
1)
Bus
1.42 W
Internal I/O
0.6 W
Additional power dissipation caused by the actua-
tors (resistive) [W]
-
Electrical isolation
Bus - RS232
No
I/O feed - I/O supply
No
BC/X2X Link feed - BC/X2X Link supply
Yes
Certification
CE
Yes
cULus
Yes
ATEX Zone 2
Yes
GL
Yes
GOST-R
Yes
Bus controller / X2X Link supply input
Input voltage
24 VDC -15% / +20%
Input current
Max. 0.7 A
Fuse
Integrated, cannot be replaced
Table 931: X20cPS9400 - Technical data
Summary of Contents for X20 System
Page 2: ......
