Coated modules • Digital input modules • X20cDI4760
X20 system User's Manual 3.10
2561
5.11.4 X20cDI4760
5.11.4.1 General information
With regard to hardware and software, this module is identical to the uncoated module of the same name.
The only differences are the:
•
Model number
•
Module ID
•
Environmental conditions
•
Additional coating (see chapter 5 "Coated modules")
For a complete description of the hardware and software, see 4.13.10 "X20DI4760".
5.11.4.2 Order data
Model number
Short description
Figure
Digital inputs
X20cDI4760
X20 digital input module, coated, 4 NAMUR inputs, 8.05 V
Required accessories
Bus modules
X20cBM11
X20 bus module, coated, 24 V keyed, internal I/O supply con-
tinuous
Terminal blocks
X20TB12
X20 terminal block, 12-pin, 24 VDC keyed
Table 958: X20cDI4760 - Order data
5.11.4.3 Technical data
Product ID
X20cDI4760
Brief description
I/O module
4 NAMUR inputs, special function
General information
B&R ID code
0xE221
Status indicators
I/O function by channel, open line and short circuit detection by channel, operating status, module status
Diagnostics
Module run/error
Yes, using status LED and software
Short circuit
Yes, using status LED and software
Open line
Yes, using status LED and software
Power consumption
Bus
0.01 W
Internal I/O
1.5 W
Additional power dissipation caused by the actua-
tors (resistive) [W]
-
Electrical isolation
Channel - Bus
Yes
Channel - Channel
No
Certification
CE
Yes
cULus
Yes
ATEX Zone 2
Yes
GL
Yes
GOST-R
Yes
Event counter
Quantity
4
Signal form
Symmetric square wave pulse or corresponding minimum pulse duration
1)
Evaluation
Every positive edge, cyclic counter
Counter size
8-bit
Table 959: X20cDI4760 - Technical data
Summary of Contents for X20 System
Page 2: ......
