Coated modules • Power supply modules • X20cPS3310
X20 system User's Manual 3.10
2637
5.22.5 X20cPS3310
5.22.5.1 General information
With regard to hardware and software, this module is identical to the uncoated module of the same name.
The only differences are the:
•
Model number
•
Module ID
•
Environmental conditions
•
Additional coating (see chapter 5 "Coated modules")
For a complete description of the hardware and software, see 4.27.5 "X20PS3310".
5.22.5.2 Order data
Model number
Short description
Figure
Power supplies
X20cPS3310
X20 power supply module, coated, for X2X Link and internal I/
O supply integrated microfuse
Required accessories
Bus modules
X20cBM01
X20 supply bus module, coated, internal I/O supply interrupted
to the left
Terminal blocks
X20TB12
X20 terminal block, 12-pin, 24 VDC keyed
Table 1022: X20cPS3310 - Order data
5.22.5.3 Technical data
Product ID
X20cPS3310
Brief description
Power supply module
24 VDC supply module for I/O and bus
General information
B&R ID code
0xDD46
Status indicators
Overload, operating state, module status
Diagnostics
Module run/error
Yes, using status LED and software
Overload
Yes, using status LED and software
Power consumption
1)
Bus
1.31 W
Internal I/O
0.82 W
Additional power dissipation caused by the actua-
tors (resistive) [W]
-
Electrical isolation
I/O feed - I/O supply
No
X2X Link feed - X2X Link supply
Yes
Certification
CE
Yes
cULus
Yes
ATEX Zone 2
Yes
GOST-R
Yes
X2X Link supply input
Input voltage
24 VDC -15% / +20%
Input current
Max. 0.7 A
Fuse
Integrated, cannot be replaced
Reverse polarity protection
Yes
X2X Link supply output
Nominal output power
7.0 W
Parallel operation
Yes
2)
Redundant operation
Yes
Table 1023: X20cPS3310 - Technical data
Summary of Contents for X20 System
Page 2: ......
