X20 system modules • Analog input modules • X20AP31x1
342
X20 system User's Manual 3.10
4.3.14.10.10.8 Reverse total reactive energy
Name:
RNenergyT
Total reactive energy in reverse direction.
Data type
Value
Information
UDINT
0 to 4,294,967,295
Resolution 0.1 or 0.01 CF, depending on the Power Line factor (e.g. kWs)
Comments:
•
The unit CF is derived from the Power Line factor (default: 3600 Imp/kWh), see register "MeteringMode"
•
The resolution can be switched between 0.1 and 0.01, see register "MeteringMode"
•
The register is updated automatically after being enabled, see register "ControlOutput" <Bit 1>
•
The register is cleared upon request, see register "ControlOutput"
•
The register is set upon request, see register "ControlOutput" <Bit 3>
4.3.14.10.10.9 Reverse reactive energy on phase A/B/C
Name:
RNenergyA
RNenergyB
RNenergyC
Reactive energy in reverse direction of the phase.
Data type
Value
Information
UDINT
0 to 4,294,967,295
Resolution 0.1 or 0.01 CF, depending on the Power Line factor (e.g. kWs)
Comments:
•
The unit CF is derived from the Power Line factor (default: 3600 Imp/kWh), see register "MeteringMode"
•
The resolution can be switched between 0.1 and 0.01, see register "MeteringMode"
•
The register is updated automatically after being enabled, see register "ControlOutput" <Bit 1>
•
The register is cleared upon request, see register "ControlOutput"
•
The register is set upon request, see register "ControlOutput" <Bit 3>
4.3.14.10.10.10 Arithmetic total apparent energy
Name:
SAenergyT
Data type
Value
Information
UDINT
0 to 4,294,967,295
Resolution 0.1 or 0.01 CF, depending on the Power Line factor (e.g. kWs)
Comments:
•
The unit CF is derived from the Power Line factor (default: 3600 Imp/kWh), see register "MeteringMode"
•
The resolution can be switched between 0.1 and 0.01, see register "MeteringMode"
•
The register is updated automatically after being enabled, see register "ControlOutput" <Bit 1>
•
The register is cleared upon request, see register "ControlOutput"
•
The register is set upon request, see register "ControlOutput" <Bit 3>
Summary of Contents for X20 System
Page 2: ......