X20 system modules • Digital output modules • X20DO2633
X20 system User's Manual 3.10
1091
4.15.6 X20DO2633
4.15.6.1 General information
The module is a digital output module with phase-angle control that is equipped with 2 Triac outputs using 3-line
connections. The supply (L and N) is fed directly to the module.
•
2 digital outputs
•
Outputs with integrated snubber circuit
•
Outputs with 12 to 240 VAC
•
L switching
•
Zero-crossing detection
•
Phase-angle control
•
Open-circuit detection for each channel
•
Negative half-waves can be switched off
•
50 Hz or 60 Hz
•
3-wire connections
•
240 V coding
•
OSP mode
•
Frequency mode
Danger!
Risk of electric shock!
The terminal block must only be allowed to conduct voltage when it is inserted. It must not under any
circumstances be removed or inserted when voltage is applied or have voltage applied to it when it
is removed.
4.15.6.2 Order data
Model number
Short description
Figure
Digital output modules
X20DO2633
X20 digital output module, 2 triac outputs, 12 to 240 VAC, 2 A,
L switching, phase angle control, 240 V keyed
Required accessories
Bus modules
X20BM32
X20 bus module for double-width modules, 240 VAC keyed, in-
ternal I/O supply continuous
Terminal blocks
X20TB32
X20 terminal block, 12-pin, 240 VAC keyed
Table 347: X20DO2633 - Order data
Summary of Contents for X20 System
Page 2: ......
