X20 system modules • Digital output modules • X20DO6639
1228
X20 system User's Manual 3.10
4.15.21 X20DO6639
4.15.21.1 General information
The module is equipped with 6 relay outputs.
•
6 digital outputs
•
Relay module for 240 VAC / 30 VDC
•
Switching current 2 A
•
6 normally open contacts
•
Single-channel isolated outputs
Danger!
Risk of electric shock!
The terminal block must only be allowed to conduct voltage when it is inserted. It must not under any
circumstances be removed or inserted when voltage is applied or have voltage applied to it when it
is removed.
4.15.21.2 Order data
Model number
Short description
Figure
Digital output modules
X20DO6639
X20 digital output module, 6 relays, normally open contacts, 240
VAC / 2 A, 30 VDC / 2 A
Erforderliches Zubehör
Bus modules
X20BM12
X20 bus module, 240 V keyed, internal I/O supply continuous
Terminal blocks
X20TB32
X20 terminal block, 12-pin, 240 VAC keyed
Table 392: X20DO6639 - Order data
4.15.21.3 Technical data
Product ID
X20DO6639
Short description
I/O module
6 digital outputs 30 VDC / 240 VAC, outputs are single-channel isolated
General information
B&R ID code
0xDF50
Status indicators
I/O function per channel, operating state, module status
Diagnostics
Module run/error
Yes, using status LED
Outputs
Yes, using status LED
Power consumption
Bus
1 W
Internal I/O
-
Additional power dissipation caused by the actua-
tors (resistive) [W]
1)
+0.36
Electrical isolation
Channel - Bus
Yes
Channel - Channel
-
Certification
CE
Yes
ATEX Zone 2
Yes
GOST-R
Yes
Digital outputs
Nominal voltage
30 VDC / 240 VAC
Switching voltage
max. 110 VDC / 250 VAC
Rated frequency
DC / 45 to 63 Hz
Nominal output current
2 A at 30 VDC / 2 A at 240 VAC
Total nominal current
10 A at 30 VDC / 10 A at 240 VAC
Table 393: X20DO6639 - Technical data
Summary of Contents for X20 System
Page 2: ......
